| » |
Hydro-mechanical mould clamping. |
| » |
Robust & fast acting 02 no.auxillary cylinders with regenerative hyd. circuit for fast platen movement. |
| » |
Larger daylight - very useful for producing deep drawn articles. |
| » |
Platen casting designed with finite element analysis for maximum rigidity. |
| » |
Mould plates with 'T' slots. |
| » |
Electrical and hydraulic safety interlocks in mould platen movements for mould & operator safety. |
| » |
Partial decompression facility. |
| » |
5-Stage mould close/4-Stage mould open pressure & speed control. |
| » |
2-Stage, multi Function hydraulic Ejection control. |
| » |
Set mode for mould mounting(Low speed & pressure mould open/close function.) |
| » |
Wear-resistant supporting tracks for moveable platen. |
| » |
Auto mould height adjustment. |
| » |
Ejection parallel to mould opening (Without speed/pressure setting on MMI) |
| » |
Core pull parallel to mould opening (Without speed/pressure setting on MMI) |
| » |
Graphite impregnated oilless bushes used to reduce wear & tear of clamping mechanism. |
| » |
Safety doors with clear PMMA windows |
| » |
Less floor space requirement. |
| » |
Twin cylinder balanced injection system. |
| » |
Nitrided screw- barrel provided for the hardness to enhance the wearresistance and long life characteristic. |
| » |
Sub-flighted screw for better melt quality and low temperature plasticisation. |
| » |
10 stage injection pressure/speed/position control.(Selectable 5 to 10). |
| » |
5 stage holding phase pressure/speed/time control.(Selectable 3 to 5). |
| » |
3 stage plasticizing pressure/ speed / position control. |
| » |
Flow moulding facility for thick parts of higher weights. |
| » |
Plasticizing cold start prevention function. |
| » |
Wide selection of special application screw & barrels |
| » |
Injection unit swiveling facility.(manual) |
| » |
Ceramic heater bands |
| » |
Nozzle centering allignment device. |
| » |
Screw speed Indication on MMI |
| » |
Short circuit proof SSR control circuit for heater bands |
| » |
High quality gear pump with robust construction |
| » |
High response BOSCH REXROTH proportional pressure/ flow valves. |
| » |
Seperate oil circulation circuit for cooling and filtering. |
| » |
The Friction-free seals to provide no stick-sleep and the high response effects during the high pressure/speed motions as well as assuring the long service life. |
| » |
Low-noise hydraulic control system |
| » |
Return line oil filter with clogging alarm signal |
| » |
Plate type oil cooler(Highly efficient & Easy maintenance) |
| » |
Provision to isolate oil tank for maintenance |
| » |
Easy maintenance |
| » |
New generation highly reliable B & R / Mitsubishi controller. |
| » |
Operator friendly screens with direct access. |
| » |
10.4"TFT colour flat screen with multifunctions for operations and display. |
| » |
Mould data Storage.60 sets of internal mold memory plus expandable with external memory storage device. |
| » |
Indication of actual operating values. |
| » |
Running function display by LED on function keys & status message on MMI. |
| » |
Machine cycle timing details in a single screen. |
| » |
Temperature setting resolution in 1 degree centigrade. |
| » |
Time setting resolution in 0.01 sec. |
| » |
Hourly & monthly production monitoring system with cumulative production counters. |
| » |
Ergonomic working height for the operator. |
| » |
USB interface to connect storage media. |
| » |
Ethernet interface port |
| » |
Thermocouple failure monitor |
| » |
Access protection via four level password system |
| » |
Control panel temperature display and interlock for overheat. |
| » |
Swivel-mounted control panel in operation station. |
| » |
Events protocol (logbook) for more than 1000 events with help menu |
| » |
Parts counter with good/bad parts evaluation |
| » |
Statistical process control of 15 various critical parameters for last 100 machine cycles |
| » |
Auto machine off facility in case of critical alarms. |
| » |
Analog input/output monitoring in milli volts |
| » |
Graphical display with history of selected function for last 5 cycles |
| » |
Auto calibration for linear transducers |
| » |
Delay timer provision for important functions |
| » |
Maintenance schedules on screen |
| » |
Analog/digital output force facility for easy diagnosis |
