|
| |
|
|
-
| This is to inform you that, the QDH 32 (4P Die) along with allied post extrusion equipments supplied by you are commissioned well and the performance was found satisfactory. We are now availing production with following parameters.... |
A Sudhakar, Director
Shudhakar Polymers Limited (Karnataka) |
-
| I wish to convey my deepest appreciation to Windsor’s team for commissioning the 3 layer Co-extrusion Blown film plant, which is the FIRST PLANT IN SRILANKA very successfully. Windsor’s attitude, commitment, dedication, determination and unselfishness to impart your knowledge, was the key factor for this project being a success... |
O.E. Senaratna, CEO
Tuffline Ltd. (Sri Lanka) |
-
It is with pleasure; we would like to appreciate Windsor’s cooperation with our maintenance staff and instructions given by service team were explicit and ideal. We have no hesitation to say that performance of your machine found to be very satisfactory.
Thanking you and looking forward your further assistance. |
Hamed A. Al Khdairi, General Manager
Al-Ahila Plastic Co, W.L.L (Kuwait) |
-
On, behalf of our company, I wish to express our sincere appreciation for the service rendered by your service team in commissioning our 3 layer blown –film plant. We wish to extend our deep and warm appreciation for the work done by your team and their short journey with us has made the installation and commissioning easier and exciting.
We look forward for continued partnership with us. |
Jose A. Castro, Jr. President and CEO
Macondray Plastics, Inc. (Philippines) |
|
| |
|
| GLOBAL PRESENCE |
|
 |
|
| |
|
| |
| Videos |
|
 |
Corporate Video |
|
|
|
 |
BARON 1500 Five Layer Film Plant |
|
|
|
 |
Rex1500 Hybrid
Demonstration of a Hybrid Blown Film Co-Extrusion line Model REX-1500-Hybrid at Plast India Show held in February 2012:- Working with 90% LLDPE rich films at a rate of 450Kg/hr on 1500mm x 40 micron , with a 250mm die lip size. Critical components like Maximiser Die head, Maximiser Air cooling Ring are imported from Kuhne, Germany. |
|
|
|
 |
Rex2200 Infinity
|
|
|
|
 |
Rapid 45
Demonstration of Inline Drip Tubing line Model Rapid-45 held on 19th June 2012 at Extrusion Division :- Working with 12mm inline drip tubing line operating at high speeds of 80-90 meter/minute with some critical equipment imported from DIS LLC, USA. |
|
|
|
 |
KTS 170/TDH 50
Twin Screw PVC Pipe Extruder Capacity 170 Kg/hr for sizes 20-110 mm, Working with 20mm x 1.8mm @160-170 Kg/hr utilization with Twin Pipe operation. |
|
|
|
 |
KTS 350/TDH 110
Twin Screw PVC Pipe Extruder capacity 350 Kg/hr, for sizes 20-110 mm, Working with 20mm x 3.2mm @280 Kg/hr utilization with Dual Pipe operation. |
|
|
|
 |
KTS 700/TDH 200
Twin Screw PVC Pipe Extruder Capacity 700 Kg/hr for sizes 63-200mm, Working with 63mm x 1.5mm @630 Kg/hr utilization with Dual Pipe operation. |
|
|
|
 |
KTS 900/TDH 200
Twin Screw PVC Pipe Extruder Capacity 900 Kg/hr for sizes 63-200mm, Working with 90mm x 2.2mm @900 Kg/hr utilization with Dual Pipe operation. |
|
|
|
 |
WHD45/110 Speed
Single Screw HDPE/PPR Pipe Extruder Capacity 300-330 Kg/hr PE sizes 20-110 mm, Working with 50mm x 3.0 mm @330 Kg/hr utilization. |
|
|
|
 |
WHD 120G / 630 |
|
| |
|
|
|