| |
|
| |
| APPLICATIONS |
|
|
| |
| |
 |
|
 |
| |
|
| KBM Series - Blow Moulding |
|
To address market requirements, Windosr has launched KBM 100 machine recently. with the success of KBM series and KBM 100 machines.
Windsor's KBM series Blow Moulding Machines are the most reliable, performing and efficient. KBM 20, KBM 30 and KBM 50 are being in the domestic and international market for more than two decades, reaping profits continuously to customers. These KBM series machines are being upgraded at regular intervals for productivity, ease of maintenance and operator friendliness.
» Robust design
» Faster dry cycle speed
» Forward - reverse movement on rails for ease of mould loading
» Sturdy contraction
» No vibrations even at high speed
» Extruder up-down movement [Motorised]
» Fixed height extruded in KBM 100 with up-down movement of mould clamping
unit
» Above given features minimize flash and hence wastage
» A.C. motor with variable speed A.C. drive for extruder
» Helical gear box with built in thrust for efficient speed reduction
» Accumulator die head of FIFO design
» Faster colour change
» Minimized wastage
» On-off type four point hydraulic parison thickness control
» Optimally designed hydraulic power pack ensures minimum power consumption
General Applications
» Edible oil packaging
» Lubricants packaging
» Packaging of drinking water
» Pharmaceuticals packaging
» Chemicals packaging
» Pesticides and insecticides packaging
» Automobile components
»
Toys |
| |
| Options |
|
» 128 point M-Power Moog make or 32 point Yaken make hydraulic parison thickness
controller
» Total machine control [TMC] of Moog - Moog parison control with high response
servo valve
» Uniform thickness control with higher accuracy and repeatability
» Unscrewing device facilitates threads for ensuring leak proof packing of chemicals |
| |
|
|
|
|
| |
|
| Technical Specifications: |
top |
|
| Machine Type |
Unit |
KBM 20 |
KBM 30 |
KBM 50 |
KBM 100 |
| EXTRUDER |
| Screw Diameter |
mm |
65 |
65 |
65 |
90 |
| Length to Dia Ratio |
- |
21:1 |
26:1 |
26:1 |
22:1 |
| Max. Plastisizing Capacity HDPE |
kg/hr |
65-70 |
110-120 |
110-120 |
180-200 |
| Barrel Heating Load |
kW |
13 |
16 |
16 |
40 |
| Die Heating Load |
kW |
13 |
16 |
16 |
27 |
| Screw Speed Range HDPE |
rpm |
12-75 |
12-120 |
12-120 |
10-85 |
| AC motor at 1500 rpm |
kW |
18.5 A.C. |
30 A.C. |
30 A.C. |
45 A.C. |
| ACCUMULATOR CAPACITY |
kg |
1.9 |
3.4 |
3.4 |
9 |
| MOULD DIMENSION |
| Height (Max) |
mm |
600 |
600 |
650 |
1000 |
| Width |
mm |
580 |
650 |
700 |
950 |
| Thickness (Min) |
mm |
2 x 155 |
2 x 155 |
2 x 225 |
2 x 230 |
| CLAMPING UNIT |
| Clamping Force (Max) |
tonnes |
12 |
14 |
17 |
60 |
| Daylight (Max) |
mm |
800 |
800 |
1100 |
1350 |
| Mould Opening Stroke (Max) |
mm |
2 x 250 |
2 x 250 |
2 x 330 |
2 x 450 |
| Daylight (Min) |
mm |
2 x 150 |
2 x 150 |
2 x 220 |
2 x 225 |
| HYDRAULIC UNIT |
| Operating Pressure |
kg/cm2 |
150 |
150 |
150 |
150 |
| Drive Power, Hydraulic Pump |
kW |
15 |
18.5 |
18.5 |
37.5 |
| Oil Tank Capacity |
Litre |
250 |
350 |
350 |
850 |
| INSTALLED TOTAL ELECTRIC POWER |
kW |
60 |
81 |
81 |
149 |
| MACHINE INSTALLATION UNIT |
| Floor Space (L x W x H) |
m |
4.75 x 4.4 x 4.25 |
5.6 x 4.7 x 4.75 |
5.6 x 4.7 x 4.75 |
7.5 x 5.8 x 5 |
| Net Weight (approx.) |
tonnes |
7.5 |
8 |
8.5 |
10.5 |
| UTILITIES |
| Air Consumption |
lpm |
350-550 |
350-550 |
350-550 |
350-550 |
| Air Pressure |
kg/cm2 |
8-10 |
8-10 |
8-10 |
8-10 |
| Water Consumption at 28° C |
lpm |
75-80 |
95-115 |
95-115 |
135-150 |
| Water Pressure |
kg/cm2 |
3-4 |
3-4 |
3-4 |
3-4 |
| ARTICLE DIMENSION |
| Max. Volume for Single Cavity |
Litre |
20 |
30 |
50 |
100 |
|
| Note: The information is provided for the purpose of guideline & indication only and doesn’t form any kind of commitments. |
|
| top |
|
|
|
|
